atom_wireFrameMd

 

Critical’s NEW ATOMX Power Supply

(SCROLL DOWN TO CHOOSE COLOR AND ADD TO CART)

  • Compatible with Coil and Rotary machines
  • Built in Neodymium magnets for a strong hold
  • Jump start Enabled for hard starting machines
  • 6 amp peak inrush current, 3 amp true RMS continuous current
  • Pedal override button (no need for a foot pedal if you run continuous mode)
  • Precision regulated set point voltage 0-17vdc
  • Built in short circuit protection
  • .1 volt adjustment resolution
  • 2 Voltage presets
  • Momentary or Maintained foot switch modes. (Easy one button toggle)
  • Non volatile memory (holds presets even when power is removed)
  • Universal input 110-240vac 50/60hz
  • Accepts standard 1/4″ clip cord and foot pedal connections
  • Easily bagged with typical machine or bottle baggies
  • Additional mounting options available in store
  • 2 year full mfg warranty
  • Made in the USA
  • $195

 

 

atom_colorArray

atomx_black_packaging-md-web

atomx_filmstrip2

atomx_silver_md_web_cart.png

atomx_black_md_web_cart

 

 

 

 

 

 

 

 


 

atom_mount_solo_web

 

atomMountCollage

 

 

 
 
 
 
• 16 gauge steel for strong attachment of Atom or AtomX power supplies
• Quickly attach to any steel surface
• Magnets can be removed for screw attachment
• Tough powder coated finish

$22.00

add to cart

atom_wireFrameMd

 

Critical’s ATOM Power Supply 

(SCROLL DOWN TO CHOOSE COLOR AND ADD TO CART)

  • Compatible with all coil and rotary machines.
  • Built in magnets and grippy silicone for use on a variety of surfaces
  • Simple push/Rotary control to turn on/off output and to change voltage (No pedal required to run)
  • Color indicates voltage (range 1.5 – 17)
  • 6 amp peak inrush current, 3 amp true RMS continuous current
  • Maintained or momentary foot pedal modes
  • Jump start enabled for hard starting rotaries
  • Fully machined, Anodized Aluminum housing – available in silver or black
  • Dimensions: 1 3/4” height, 2 7/8” diameter, 6.4 oz weight
  • Comprehensive 2 year manufacturers warranty
  • Includes: Atom power supply, 1 US power cord and power adapter 
  • $165.00

atom_colorArray

 

atomWebsiteFilmstrip

black_packaging_lowres

atom_black_cart-lowresatom_silver_cart-lowres

 

 

 

 

 

 

 

 


 

RamMount

Our G2 Ram Mount consists of a 1″ diameter rubber ball,

connected to a custom Critical G2 Power Supply adapter.

The adapter attaches directly to the backside of any Critical G2 Power Supply ,

replacing our factory mount. $29.00

Included: 1 RAM mount and 10/32 screw

Made in the USA

add to cart

G2_WallMount_smallER NEW!!! Designed for wall mounting a power supply, 

   this mount fits only our G2 power supplies. $15.00          

Included: 1 wall mount, 2 wall anchors, 1 wing nut and 2 #8 x 1″ wall mounting screws  

Made in the USA                                

                       add to cart  

                                                                                                                                                                                                                                                               

 

                                                                                                                                              

                                                                                                                                                                 

G2_ClampMount_smallER

Designed for convention travel, this mount clamps to a standard convention

table and puts your power supply right were you want it.

 This model fits only our G2 power supplies.  $18.00

Included: 1 Clamp mount and 1 10/32 wing nut screw


Made in the USA 

add to cart

 

mac-partsWe were building tattoo machines long before we started developing power supplies.  Our machines are precision pieces built with a hybrid frame design comprised of cast, low carbon steel side frame, pinned and vacuum furnace brazed to a billet low carbon steel base-plate.  They are then CNC machined to tight tolerances and hand finished for a smooth, classy feel.  We like things that are refined and clean yet still feel solid and well built.  Every machine is hand tuned by tattooers.  One unique feature that we brought to the table with our machines is the circuit plate.  The circuit plate cleans the machine up by eliminating solder lugs, heat shrink, free hanging capacitor, and 2 of the insulator washers.  The result is a super clean design with a more positive seat for the front binder so that it doesn’t loosen or move around as the insulator washer starts to squish and soften.  As we put a great deal of time into getting them right, we only keep a small quantity available and often times we build them to order so we like to have two weeks to ship.  Call to check for availability.
Lifetime warranty.

 

 

002R-3D-1

 

 

 

 

Critical’s G2 Series of power supplies have been completely re-engineered from the ground up to produce the cleanest, most crisp power available on the market.  With the new 6 amp peak current capacity and true 4 amp continuous current capacity, the G2 power supplies can handle any coil or rotary tattoo machine on the market with solid power, no matter how long you tattoo.  We’ve spent the last two years getting our new electronics just right.  With a sleek, freshened up enclosure, keypad, and lower profile universal mount bracket, the G2 maintains the “off the work surface and easy to bag” form factor we pioneered and our customers love.  Scroll down for information about the NEW features available and check out the tech info page for a better understanding about what makes our power the best power.

 

Mounting_FilmStripDisplay_Screens


 

**Our wireless pedal requires a receiver to work.  It can only be purchased as our CX-2R combo or Universal receiver combo.

cxp_solowebsiteNEW CXP Wireless Foot Pedal
    

• NEW! Lower Price
• NEW! Improved shielding to limit debris getting inside the pedal
• NEW! Better response with one central switch vs multiple contact springs
• NEW! Uses 2 AAA batteries (included) that last 3 years of daily tattooing
• NEW! Spun, anodized aluminum top
• Non-skid rubber bottom
• Easily bagged
• Can also be used wired with any standard clip cord
• Run as many as you want in one place without interference
• Compatible with all past and future Critical power supply models
• Dimensions: 5 inch Diameter, 1 inch height, 8.6 ounce weight
• Comprehensive 2 year manufacturer warranty

 

 

 

 

 

POW-2-R-3VIEW2

  • Jump start Enabled for hard starting rotaries
  •  Independent Dual Outputs
  •  6 amp peak inrush current, 3 amp true RMS continuous current
  •  Session machine run time meter
  •  Total machine run time (odometer)
  •  Session time
  •  Session currency meter (based on hourly rate set by user)
  •  Pedal override button (No need for a foot pedal if you run continuous mode)
  • Wireless foot switch ready
  • You can now select the channel you want
  • Precision regulated set point voltage 0-18vdc
  • Built in short circuit protection
  • .1 volt adjustment resolution
  • Time of day
  • Voltage presets with 2, 4, or 6 machine memory modes
  • Momentary or Maintained foot switch modes. (Easy one button toggle)
  • Non-volatile memory (holds time and presets even when power is removed)
  • Universal input 110-240vac 50/60hz
  • Accepts standard 1/4″ clip cord and foot pedal connections
  • Volts, Amps, Speed (hz), Duty Cycle (%), and STL
  • Easily bagged with typical machine or bottle baggies
  • Additional mounting options available in store
  • 2 year full manufacturer warranty
  • Click here for product comparison
  • Click here for additional mounting options
  • $300.00 
  • Included: G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter 
  • Made in the USA

Add CX2R-G2 Power Supply to Cart

 

blackfinal400Dimension LxWxH : 2 x 1 x 1.5 inch
Input voltage : 0- 12 volt DC (max. 14 volt DC)
Power connections : Clipcord
Rpm range Stitches / sec : 0 – 7200 rpm / min 0 – 130 / sec
Stroke length : Standard stroke 3.5 mm 
Max. tube diam : 08 mm
Max. needle size : 50 magnum
Weight : 3.8 ounces
$390.00
Included: 1 Bishop Rotary and 1 Lube stick

add to cart

 

POW-2-3VIEW
        • Jump start Enabled for hard starting rotaries
        •  6 amp peak inrush current, 3 amp true RMS continuous current
        •  Session machine run time meter
        •  Total machine run time (odometer)
        •  Session time
        •  Session currency meter (based on hourly rate set by user)
        •  Pedal override button (no need for a foot pedal if you run continuous mode)
        • Precision regulated set point voltage 0-18vdc
        • Built in short circuit protection
        • .1 volt adjustment resolution
        • Time of day
        • Voltage presets with 2, 4, or 6 machine memory modes
        • Momentary or Maintained foot switch modes. (Easy one button toggle)
        • Non-volatile memory (holds time and presets even when power is removed)
        • Universal input 110-240vac 50/60hz
        • Accepts standard 1/4″ clip cord and foot pedal connections
        • Volts, Amps, Speed (hz), Duty Cycle (%), and STL
        • Easily bagged with typical machine or bottle baggies
        • Additional mounting options available in store
        • 2 year full manufacturer warranty
        • Click here for product comparison
        • Click here for additional mounting options
        • $250.00
        • Included: 1 G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter 
        • Made in the USA

Add CX2-G2 Power Supply to Cart

 

 

cxp_solo_wiredWebReady

 

 

 

• NEW! Critical pedal now available in non-wireless version
• NEW! Improved shielding to limit debris getting inside the pedal
• NEW! Better response with one central switch vs multiple contact springs
• NEW! Spun, anodized aluminum top
• Non-skid rubber bottom
• Easily bagged
• Can be used wired with any standard clip cord (not included). Available for purchase HERE. Simply swap clip cords NOT pedals if the cord fails!
• Dimensions: 5 inch Diameter, 1 inch height, 8.2 ounces
• Comprehensive 2 year manufacturer warranty
• Made in the USA

 

add to cart

NEW! This steel baseplate is the best option when you are working off of a non-magnetic surface and need a free standing unit.  It is a very heavy 1/8″ thick, 6″ diameter, powder coated, with a rubber bottom so it stays put. $13.00
Made in the USA

Add Stand alone baseplate to Cart

 

1″ height 8 wrap coils
Antique Brown finish
Typical performance @ 6 volts: 145hz/55% duty with about a nipple and an eighth throw
Pushes 3’s to 9’s all day

Notice: 1-2 week lead time on all Machines

Please call for replacement hardware

$300.00

Add Williford Liner, Brown, 1-2 week build to Cart

 

Replacement power adapter,
grounded 90-240v A/C worldwide input (will require a different cord for other countries)
0-18vdc 45watt output.
Supplied with a North American cord set (C5 input)

$35.00

Add Replacement power adapter and cord for all Critical power supplies to Cart

 

1″ height 8 wrap coils
Black Parkerized finish
Typical performance @ 6 volts: 145hz/55% duty with about a nipple and an eighth throw
Pushes 3’s to 9’s all day

Notice: 1-2 week lead time on all Machines

Please call for replacement hardware

$300.00

Add Williford Liner, Black, 1-2 week build to Cart

Replacement mount and wing screw for Generation 2 power supplies. $22.00
Made in the USA

Add Additional G2 Mount  to Cart

 

We offer a wing style screw replacement for our G2 Mounts in case your apprentice loses yours… again. $2.00

Add Replacement wing screw for G2 power supplies to Cart

 

1″ height 8 wrap coils
Antique Brown finish
Typical performance @ 7 volts: 115hz/45% duty with about a nipple and an half throw
Pushes just about anything

Notice: 1-2 week lead time on all Machines

Please call for replacement hardware

$300.00

Add Williford Shader, Brown, 1-2 week build to Cart

1″ height 8 wrap coils
Black Parkerized finish
Typical performance @ 7 volts: 115hz/45% duty with about a nipple and an half throw
Pushes just about anything

Notice: 1-2 week lead time on all Machines

Please call for replacement hardware

$300.00

Add JWS Shader Machine to Cart

uniCombo

• NEW! Lower Price
• NEW! Improved shielding to limit debris getting inside the pedal
• NEW! Better response with one central switch vs multiple contact springs
• NEW! Uses 2 AAA batteries (included) that last 3 years of daily tattooing
• NEW! Spun, anodized aluminum top
• Adds maintained pedal mode feature
• Non-skid rubber bottom
• Easily bagged
• Can also be used wired with any standard clip cord
• Run as many as you want in one place without interference
• Powered via external power adapter (supplied) with North American or European cord (specify at checkout)
• Dimensions: 5 inch Diameter, 1 inch height, 8.6 ounces
• Comprehensive 2 year manufacturer warranty
• Made in the USA

 


Replacement Liner Springs
Made in the USA

$7.00

Add Spring Set, Liner to Cart

 

• Our Universal receiver will plug into any power supply with a standard 1/4? foot pedal jack
• Works with any of our current, past and future wireless pedals
• Adds maintained pedal mode feature
• Powered via external power adapter (supplied) with North American cord
• Comprehensive 2 year manufacturer warranty
• Made in the USA

$95.00

 

Replacement Shader Springs

$7.00

Add Spring Set, Shader to Cart

• Our Universal receiver will plug into any power supply with a standard 1/4? foot pedal jack
• Works with any of our current, past and future wireless pedals
• Adds maintained pedal mode feature
• Powered via external power adapter (supplied) European cord
• Comprehensive 2 year manufacturer warranty
• Made in the USA

$95.00

 

High-quality, hand made, 6.5′ high flex cable. Standard 1/4″ phono jack. $25.00

Add Clip Cord, 6.5'  to Cart

 

5″x8″ 2 Mil Poly Bags for covering your CX2 or CX2-R to maintain the cleanest environment possible.

100 count for $2.50

Add 100 Barrier Bags for CX2 to Cart

 

5″x6″ 2 Mil Poly Bags for covering your CX1 to maintain the cleanest environment possible.

100 count for $2.50

Add 100 Barrier Bags for CX1 to Cart

 

POW-1-3VIEW

    • Jump start Enabled for hard starting rotaries
    •  6 amp peak inrush current, 3 amp true RMS continuous current
    •  Pedal override button (no need for a foot pedal if you run continuous mode)
    • Precision regulated set point voltage 0-18vdc
    • Built in short circuit protection
    • .1 volt adjustment resolution
    • Voltage presets 2
    •  Momentary or Maintained foot switch modes. (Easy one button toggle)
    • Non volatile memory (holds presets even when power is removed)
    • Universal input 110-240vac 50/60hz
    • Accepts standard 1/4″ clip cord and foot pedal connections
    • Easily bagged with typical machine or bottle baggies
    • Additional mounting options available in store
    • 2 year full mfg warranty
    • Click here for product comparison
    • Click here for additional mounting options
    • $150.00
    • Included: 1 G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter 
    • Made in the USA 

Add CX1-G2 Power Supply to Cart

 

 

cx2rCombo_cxp_web

    

Cleanest wireless set up available!   CX-2R with internal receiver and NEW CXP Wireless Foot Pedal. No receivers to lose track of – just a power supply and pedal.

• Jump start Enabled for hard starting rotaries
• Independent Dual Outputs
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Session machine run time meter
• Total machine run time (odometer)
• Session time
• Session currency meter (based on hourly rate set by user)
• Pedal override button (No need for a foot pedal if you run continuous mode)
• Wireless foot switch ready
• You can now select the channel you want
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
•.1 volt adjustment resolution
•Time of day
•Voltage presets with 2, 4, or 6 machine memory modes
•Momentary or Maintained foot switch modes. (Easy one button toggle)
•Non-volatile memory (holds time and presets even when power is removed)
•Universal input 110-240vac 50/60hz
•Accepts standard 1/4? clip cord and foot pedal connections
•Volts, Amps, Speed (hz), Duty Cycle (%), and STL
•Easily bagged with typical machine or bottle baggies
•Additional mounting options available in store
•2 year full manufacturer warranty

CXP Wireless Foot Pedal

•NEW!  Lower Price
•NEW!  Improved shielding to limit debris getting inside the pedal
•NEW!  Better response with one central switch vs multiple contact springs
•NEW!  Uses 2 AAA batteries (included) that last 3 years of daily tattooing
•NEW!  Spun, anodized aluminum top
•Non-skid rubber bottom
•Easily bagged 
•Can also be used wired with any standard clip cord
•Run as many as you want in one place without interference 
•Compatible with all past and future Critical power supply models
•Dimensions:  5 inch Diameter, 1 inch height, 8.6 ounces
•Comprehensive 2 year manufacturer warranty 
•Included: 1 CX2-R Power supply, 1 G2 Magnet mount, 1 CXP Wireless Foot Pedal, 1 10/32 wing nut screw, 1 US power cord and adapter
• Made in the USA

 

Add CX2R-G2 Power Supply/ Wireless Pedal Combo to Cart

·